Nobody wants to have to remove the mold from their home, but if you live in an older house, then you may have to go through this eventually. Even newly built homes can have mold growing in them in certain areas if bad techniques were used or just poor quality materials. As long as the building codes in your area were followed by the contractor of your new house, there is nothing that you can do, even if the poor quality materials are the reason that mold exists. If the job was done “by the book”, then you cannot obtain any legal compensation. When having a home built for you, make sure you know that the contractor you hired to do it will do the job with good quality building materials and get references before even letting them start.
But, what do you do if you already have mold in the house? Well, you can probably clean up a lot of it yourself if you have a smaller mold problem. If you have experience in interior remodeling work, then you can tackle even a larger scale mold removal project on your own. Your insurance may even cover it, if it is due to another kind of damage that your homeowner’s insurance covers, like water leaks.
There is a certain amount of equipment that you will need if you are going to do this job on your own, though. Having a respirator is something that you will really need, especially if you are going to open up any walls. You can get a basic respirator from a hardware store, but if you are going to open up any walls, you will probably want a respirator that has a HEPA filter attached to it.
You will also want a few heavy duty trash bags to toss the debris in.
As far as some protective equipment that you can wear, heavy duty rubber gloves might also be helpful depending on what you are handling. If you are just scrubbing floors or walls, then you could probably get away with some lighter latex gloves. Some plastic disposable coveralls and covers for your shoes will help keep mold spores from getting on your clothes. Safety glasses might also be necessary.
As with your respirator, the cleanup job after all the debris is gone should be done with a vacuum that has a HEPA filter on it. This will release clean, filtered air back into your home instead of releasing the dust and mold spores like a normal vacuum would.
Saturday, January 19, 2008
Water Loves Your Deck, Too
Barbequing and swimming in the pool in the backyard is a staple at many private homes across the country that are lucky enough to have both and anyone who has both those items is likely to want a hardwood deck built onto the back of the house for just this purpose. They look very nice and most homeowners will brag for weeks or even years about how much they love their deck and for good reason. Taking care of the deck either on the front of the house or the back is not too difficult, but if you neglect to do this, then you could be dealing with some serious damage later on down the road.
Waterproofing the deck attached to your home is very important if you do not want to have to replace parts of it later. Water does much more damage to wooden items left out in the elements than we might realize and it is important to make sure that as soon as possible after your deck is built (wait at least 30 days after construction), it gets waterproofed. You can do this or you can hire someone else to do it for you, depending on whether time or money is the most important factor. You may not have the time to do it or you may not have the money, but if you want to keep your deck looking good, you will have to sacrifice one or the other.
Applying a stain to the deck should be done before waterproofing, because the sealant that you put on it will not only repel rain, but also other liquids. Allow the stain to set the appropriate amount of time before applying the sealant.
Sealants for decks can be purchased at most hardware, home improvement, or department stores and applying them is a cinch. You do need to make sure that the whole deck gets cleaned first with a deck cleaner that you can also purchase at one of these places. This will be applied with a pump sprayer and allowed to foam up before you scrub it with a stiff bristled brush. Rinse it with a hose when you are done.
All furniture should be removed before you put the sealant on. For safety, you may want to sand down any sharp edges or splinters that may be sticking up, if you are doing this to an older deck that already shows signs of wear.
The sealant should be applied with a sprayer or a roller, depending on what the instructions call for. After you apply it to the deck, you need to wait at least a few days before walking on it so the seal is not damaged.
Waterproofing the deck attached to your home is very important if you do not want to have to replace parts of it later. Water does much more damage to wooden items left out in the elements than we might realize and it is important to make sure that as soon as possible after your deck is built (wait at least 30 days after construction), it gets waterproofed. You can do this or you can hire someone else to do it for you, depending on whether time or money is the most important factor. You may not have the time to do it or you may not have the money, but if you want to keep your deck looking good, you will have to sacrifice one or the other.
Applying a stain to the deck should be done before waterproofing, because the sealant that you put on it will not only repel rain, but also other liquids. Allow the stain to set the appropriate amount of time before applying the sealant.
Sealants for decks can be purchased at most hardware, home improvement, or department stores and applying them is a cinch. You do need to make sure that the whole deck gets cleaned first with a deck cleaner that you can also purchase at one of these places. This will be applied with a pump sprayer and allowed to foam up before you scrub it with a stiff bristled brush. Rinse it with a hose when you are done.
All furniture should be removed before you put the sealant on. For safety, you may want to sand down any sharp edges or splinters that may be sticking up, if you are doing this to an older deck that already shows signs of wear.
The sealant should be applied with a sprayer or a roller, depending on what the instructions call for. After you apply it to the deck, you need to wait at least a few days before walking on it so the seal is not damaged.
Taking Care of Your Water Pipes
Living in your first home can be an exhilarating experience, but when the winter gets to your area, you may forget about some things that you can do to keep your water pipes from bursting. In fact, you may not think of this at all, since you are probably not used to maintaining a home that belongs to you. Your home is an investment and you should take care of it as much as you can, since you may want to sell it later in exchange for another. Your parents probably insulated the pipes in your home when you were younger, but you probably did not really get the significance of this at the time.
When it gets colder than 20 degrees outside, the water pipes that are exposed to these temperatures are likely to freeze and burst. If you are not home at the time, like off on vacation for Christmas or another holiday, this can wreak havoc on your water bill if you do not get home and fix the problem soon and it can also cause a significant amount of water damage to your home in the process.
Any pipes that will be exposed to this weather that you can get to should be insulated in some way. You can do this by wrapping them in cloth or preferably a construction grade of insulation. A good amount of cloth will help in a pinch, though.
Inside your home, the pipes underneath the different sinks in the house can be kept warm by opening the cabinets so the heat in the house can get to them. Keeping a space heater near exposed pipes in your basement could also be a good idea, but use extreme caution when using space heaters, since they can catch on fire. You can use an extension cord with a space heater, but it needs to be a pretty heavy duty one and most homes do not keep extension cords as heavy duty as the kind needed around often. Place space heaters in your home very carefully and if possible, do not use them on carpeted surfaces.
You can also leave a trickle of water running out of the faucets when the temperatures outside get this low. It might add a little bit to the water bill, but it is only necessary to do this when the temperature gets below freezing, especially at night.
When it gets colder than 20 degrees outside, the water pipes that are exposed to these temperatures are likely to freeze and burst. If you are not home at the time, like off on vacation for Christmas or another holiday, this can wreak havoc on your water bill if you do not get home and fix the problem soon and it can also cause a significant amount of water damage to your home in the process.
Any pipes that will be exposed to this weather that you can get to should be insulated in some way. You can do this by wrapping them in cloth or preferably a construction grade of insulation. A good amount of cloth will help in a pinch, though.
Inside your home, the pipes underneath the different sinks in the house can be kept warm by opening the cabinets so the heat in the house can get to them. Keeping a space heater near exposed pipes in your basement could also be a good idea, but use extreme caution when using space heaters, since they can catch on fire. You can use an extension cord with a space heater, but it needs to be a pretty heavy duty one and most homes do not keep extension cords as heavy duty as the kind needed around often. Place space heaters in your home very carefully and if possible, do not use them on carpeted surfaces.
You can also leave a trickle of water running out of the faucets when the temperatures outside get this low. It might add a little bit to the water bill, but it is only necessary to do this when the temperature gets below freezing, especially at night.
Subscribe to:
Posts (Atom)
