The refrigerator is an appliance that most people make use of at least once a day, whether it is for breakfast, lunch, dinner, or just a snack. It is in the central room of the house, since the kitchen is the room that the family tends to gather in the most and we tend to realize that this is the room that needs to be kept clean the most. The food that is prepared here is meant to make and keep us healthy and a dirty refrigerator contaminated with mold and bacteria is definitely something that is unwanted.
Keeping an eye on the condition of your food in the refrigerator is important to make sure that your family stays healthy and while most of us lead fairly full and busy lives these days, it still needs to be done by someone. Take the time to clean out your refrigerator at least once every few months and take an inventory of what you need to replace often. Outdated items like jams and jellies, even if they have not started showing mold yet, should be thrown away if they have had the seal broken. Most items will be fine even if they are outdated as long as the seals on the jars have not been broken.
Fruits and vegetables that have become molded need to be thrown away before they can contaminate anything other fruits or vegetables nearby. Removing them from the plastic bags that you put them in then you purchased them at the store is also a good idea, since condensation from the bags can actually help mold start to grow.
Dense items that have little moisture in them are not good candidates for mold growth and if mold does grow on these items, like blocks of cheese or hard salami, you can cut around the molded areas and throw them away instead of throwing away the whole item. This cannot be done with slices of cheese, tubs of sour cream, jellies, jams, mayonnaise, and other heavily moist foods.
Cleaning out the inside of the refrigerator with the cleaning solution of your choosing is something you need to do regularly. Spills of liquid and food happen in it all the time and bacteria will feed on this. Take everything out and throw away everything outdated and those items that you no longer need. Clean off the bottoms of anything that you want to put back if they have anything on them, as well. You should also remove all the racks and shelves that you can and clean them in the sink before you put them back.
Saturday, January 19, 2008
Inspecting the House For Mold
Going through your house and looking for mold is something that every homeowner should do at least two or three times a year, especially since mold can start growing in as little as 48 hours after the spores land on something they like. Killing the mold is not the only problem you will have to deal with if you find it; removing the mold from the property is something else to be concerned with, since dead mold spores can still cause allergic reactions in some people. Depending on the severity of the allergy, these reactions can be a simple case of sneezing or as severe as requiring hospitalization. You can take antihistamines to help combat this, but no one should take medication if they do not have to.
There are a few places in your house that you need to inspect regularly for mold growth. These are areas of the house that naturally have a lot of moisture and these include the kitchen, bathroom, laundry room, and the basement.
The basement is somewhat humid because of its underground location, but there are things that you can do to add unnecessary humidity to it. Some people use the basement as a laundry room as well and this is fine, but you need to make sure that the dryer is properly vented to the outside of the house. Having an exhaust fan in the room will also help get rid of some of the excess moisture. One thing that you should really avoid doing at all costs is hanging up laundry to dry without proper ventilation.
The bathroom is one of the worst areas for mold in the house and this is generally due to flawed waterproofing. This could be cracked tiles on the floor, missing areas of grout or caulking, or mold growing on the ceiling because the humidity in the room is too high. This can be corrected by having an exhaust fan installed, just like in the basement. In fact, having these fans in all moist rooms of the home is recommended and the chances for mold growth will be greatly reduced.
Something to avoid having in the bathroom or another moist area of the home is carpet. Mold loves to grow in carpet and once the padding underneath it is contaminated, it has to be taken up and thrown away, because it cannot be cleaned.
The kitchen is another area where the floor and ceiling are the most at risk. Try to seal up and cracks in the flooring and make sure there is an exhaust system over the stove to get rid of steam before it hits the ceiling.
There are a few places in your house that you need to inspect regularly for mold growth. These are areas of the house that naturally have a lot of moisture and these include the kitchen, bathroom, laundry room, and the basement.
The basement is somewhat humid because of its underground location, but there are things that you can do to add unnecessary humidity to it. Some people use the basement as a laundry room as well and this is fine, but you need to make sure that the dryer is properly vented to the outside of the house. Having an exhaust fan in the room will also help get rid of some of the excess moisture. One thing that you should really avoid doing at all costs is hanging up laundry to dry without proper ventilation.
The bathroom is one of the worst areas for mold in the house and this is generally due to flawed waterproofing. This could be cracked tiles on the floor, missing areas of grout or caulking, or mold growing on the ceiling because the humidity in the room is too high. This can be corrected by having an exhaust fan installed, just like in the basement. In fact, having these fans in all moist rooms of the home is recommended and the chances for mold growth will be greatly reduced.
Something to avoid having in the bathroom or another moist area of the home is carpet. Mold loves to grow in carpet and once the padding underneath it is contaminated, it has to be taken up and thrown away, because it cannot be cleaned.
The kitchen is another area where the floor and ceiling are the most at risk. Try to seal up and cracks in the flooring and make sure there is an exhaust system over the stove to get rid of steam before it hits the ceiling.
Hardwood Deck Waterproofing
Every homeowner who has the space to build one in would love to have a fresh hardwood porch or one in the back to barbecue on, but those of us who already have one want to do whatever we can to protect it from the elements. Over the years your deck will suffer from different forms of precipitation and natural damage and protecting it from these is a little more difficult than from the regular wear and tear of feet running across it. Rain will cause the deck to crack and warp over time, but sealing it water tight with a chemical that can be purchased at almost any hardware or home improvement store will protect it for years to come.
The easiest way to protect your deck is by waterproofing it with a deck sealant, but you can do this yourself or hire someone to do it for you. Doing it yourself is not very difficult and you should be able to manage fine, so this is great for anyone who is on a budget, but if money is not a concern to you and your time is, hiring someone else may be the way to go.
If your deck is newly constructed, then you will want to wait at least 30 days before doing anything like this to the surface of it, since new lumber needs time to adjust to your climate and get rid of any oils and moisture that may already be inside it. If you want to put a stain on the deck, this is probably a good time to do it, since the sealant will prevent the deck from soaking up most liquids.
Clean everything off of the deck and scrub it before you do anything else, whether it’s applying the stain or the sealant. It needs to be as free of furniture, dirt, and other debris as possible. You can purchase a deck cleaning solution from your local hardware, home improvement, or department store and apply it yourself with a pump sprayer. Scrub it with a stiff bristled brush to get it as clean as you can and rinse it off with your water hose when you get finished. It is starting to look better already!
Follow the instructions on the deck sealant and this should include using a sprayer or a roller to apply it to the surface of the wood. You need to let it dry for a few days before walking on it, so start from the end of the deck furthest from a good entrance and work your way back.
The easiest way to protect your deck is by waterproofing it with a deck sealant, but you can do this yourself or hire someone to do it for you. Doing it yourself is not very difficult and you should be able to manage fine, so this is great for anyone who is on a budget, but if money is not a concern to you and your time is, hiring someone else may be the way to go.
If your deck is newly constructed, then you will want to wait at least 30 days before doing anything like this to the surface of it, since new lumber needs time to adjust to your climate and get rid of any oils and moisture that may already be inside it. If you want to put a stain on the deck, this is probably a good time to do it, since the sealant will prevent the deck from soaking up most liquids.
Clean everything off of the deck and scrub it before you do anything else, whether it’s applying the stain or the sealant. It needs to be as free of furniture, dirt, and other debris as possible. You can purchase a deck cleaning solution from your local hardware, home improvement, or department store and apply it yourself with a pump sprayer. Scrub it with a stiff bristled brush to get it as clean as you can and rinse it off with your water hose when you get finished. It is starting to look better already!
Follow the instructions on the deck sealant and this should include using a sprayer or a roller to apply it to the surface of the wood. You need to let it dry for a few days before walking on it, so start from the end of the deck furthest from a good entrance and work your way back.
Subscribe to:
Posts (Atom)
