Finding mold growing in your refrigerator is something that we cannot usually avoid, because mold exists everywhere we are and it grows on dead organic materials, just like what we keep in our refrigerator. There are ways, however, to reduce the amount of mold that will grow in your refrigerator.
You should take inventory of your refrigerator and anything that is outdated beyond use should be thrown away because if mold is not growing on it now, it will eventually. The sooner that you forget an outdated item is in your refrigerator, the sooner mold will begin to grow inside it and spread to other items nearby. The spread of mold in this way is especially true of fruits and vegetables that are often stored in a bin on top of each other. One infected item can affect the whole bin and make it inedible. It is best to go through these items as often as possible to make sure anything contaminated is removed.
When you bring fruits and vegetables home from the grocery store, we often have them in the plastic bags that we used in the produce section to pack them in. You should probably remove these items from the bags in order to reduce the amount of condensation they are exposed to. Condensation will build up inside the bag as water evaporates and mold will begin to grow.
Cleaning the refrigerator regularly is also essential to slow the growth of mold. Everything in the refrigerator should be washed thoroughly and since no surface inside it should be porous, using chlorine bleach to wash the inside should be fine to assist in removing any mold that has begun to grow. Whatever you choose to clean your refrigerator with, please do not mix household chemicals when cleaning your home. The results can be harmful or even deadly if you mix the wrong two, such as bleach and ammonia.
Before you really start cleaning it out, take the light bulb out of your fridge because they are not made to be left on for more than a few minutes and will possibly burn out if you leave the refrigerator door open for too long.
After you are done washing the inside of the refrigerator, take a few minutes and go through everything as mentioned earlier and throw out anything that you think is too old. Washing down the outside of the refrigerator is also a good idea.
Showing posts with label remediation. Show all posts
Showing posts with label remediation. Show all posts
Saturday, January 19, 2008
You Only Have 20 Seconds To Save Your Cell Phone From Water Damage
Odds are good that if you have a cell phone that cost you a few hundred dollars to purchase, the last thing that you want to happen is to allow it to be submerged in water for any length of time. Unfortunately, accidents do happen and most cell phone warranties do not cover water damage at all. Cell phones have recently been equipped with stickers both on the inside of the battery compartment and on the circuit board that change color when they have come into contact with water. These stickers also have been known to trigger when exposed to high levels of humidity, resulting in a number of people who have never let their phones come into contact with water being denied a claim on their warranty.
If you do happen to drop your cell phone into the kitchen sink or the pool, there is something that you can do to save your phone. Unless you drop the phone off into deep water and you cannot retrieve it in under about 20 seconds, you should be able to revive it.
The first thing that you should do is get the phone out of the water as soon as possible and begin drying the outside. It takes water a few seconds to get inside your phone since the new casings are pretty tight.
After you get the phone out of the water, remove the battery pack and set it aside so that it can dry separately. Remove your SIM card, if your phone has one, as well. These cards can be just as valuable as or even more valuable than the phone itself depending on what contact information exists on the card. You can put it into a bowl of uncooked rice; this will help draw out any moisture that might have made it into your phone. Let it stay in the bowl at least overnight before you put the battery back into it.
Once you put the battery back into the phone, try and turn it back on. If it does not work, plug the phone into a wall outlet in your home. If this works, then you just need a new battery and you should be able to get one of those as long as you are willing to spend the money to get a new one from the manufacturer.
If you do happen to drop your cell phone into the kitchen sink or the pool, there is something that you can do to save your phone. Unless you drop the phone off into deep water and you cannot retrieve it in under about 20 seconds, you should be able to revive it.
The first thing that you should do is get the phone out of the water as soon as possible and begin drying the outside. It takes water a few seconds to get inside your phone since the new casings are pretty tight.
After you get the phone out of the water, remove the battery pack and set it aside so that it can dry separately. Remove your SIM card, if your phone has one, as well. These cards can be just as valuable as or even more valuable than the phone itself depending on what contact information exists on the card. You can put it into a bowl of uncooked rice; this will help draw out any moisture that might have made it into your phone. Let it stay in the bowl at least overnight before you put the battery back into it.
Once you put the battery back into the phone, try and turn it back on. If it does not work, plug the phone into a wall outlet in your home. If this works, then you just need a new battery and you should be able to get one of those as long as you are willing to spend the money to get a new one from the manufacturer.
Labels:
cell,
damage,
electronics,
killer mold,
laptops,
phones,
remediation,
restoration,
water
A Few Tips For Employers To Protect Employees And Business Against Mold
When we go to our daily work place, we usually like to believe it to be a very safe environment. However, one safety aspect that is often and sadly overlooked is that of mold infestation. We usually believe that mold is not a problem to have to deal with in the work place and that mold is a problem that is only dealt with in the home. However, any building is equally susceptible to mold infestation. If you are an employer, you are therefore responsible for the safety of every person who is inside the building. If you do not make sure that mold is not in the building, you could be liable for any medical expenses that one of your employees may have as a result of exposure to mold in the work place. If you suspect that there may be mold in your building, you must first conduct your own testing. If you do, indeed, find mold, it is your responsibility to send off the mold samples to a laboratory that specializes in mold identification. You should receive your results within a few weeks to a month.
The first thing you should do upon finding out that there is a mold infestation, and what kind of mold it is, is to inform your employs that there is a problem. You should inform them of what measures are to be taken. You should next call an inspector as to determine how extensive the contamination is and if the case is mild, and can be dealt with in a short amount of time, or if the case is serious and could take up to several weeks to remedy. If the case is extreme, you should notify your employees that they are being laid off for the duration of the remediation process. You should tell them when the process will begin, and give an approximation of when the process will end.
You should also ask your employees if they have been experience any kind of health problems since working for you. Specific health problems that you should look for are respiratory problems, skin rashes, and any other kinds of complications commonly associated with mold.
If your building is indeed contaminated, it should never be ignored, be it your home or work place. If you can afford to pay for the medical bills of others, you still do not want there to be health problems for yourself.
The first thing you should do upon finding out that there is a mold infestation, and what kind of mold it is, is to inform your employs that there is a problem. You should inform them of what measures are to be taken. You should next call an inspector as to determine how extensive the contamination is and if the case is mild, and can be dealt with in a short amount of time, or if the case is serious and could take up to several weeks to remedy. If the case is extreme, you should notify your employees that they are being laid off for the duration of the remediation process. You should tell them when the process will begin, and give an approximation of when the process will end.
You should also ask your employees if they have been experience any kind of health problems since working for you. Specific health problems that you should look for are respiratory problems, skin rashes, and any other kinds of complications commonly associated with mold.
If your building is indeed contaminated, it should never be ignored, be it your home or work place. If you can afford to pay for the medical bills of others, you still do not want there to be health problems for yourself.
Labels:
damage,
employers,
mold,
mould,
remediation,
restoration,
water
Subscribe to:
Posts (Atom)